Compatible Solidoodle Software

From SoliWiki
Jump to: navigation, search

This page is dedicated to exploring options for Solidoodle compatible software.


[edit] Officially Supported

Solidoodle officially supports Skienforge for slicing your STLs and turning them into GCode. The software package on Solidoodle's website includes a configuration file for the Solidoodle, so it is ready to be used out of the box with no additional changes to the settings.

The second officially supported piece of software is Pronterface, which is also included in the software package on Solidoodle's website (linked above). Pronterface controls the printer by sending GCode to it.

The packages are available on the Solidoodle website for Windows, Mac OSX, and Linux.

[edit] Unofficially Supported (firmware update required)

Suites

Repetier-Host - http://www.repetier.com/ 

Direct Downloads: 
http://www.repetier.com/?wpdmact=process&did=MTQuaG90bGluaw== (MAC)  
http://www.repetier.com/?wpdmact=process&did=MTIuaG90bGluaw== Repetier-Host 0.74 (WINDOWS)


Slicers

Kisslicer - http://kisslicer.com/  
  http://kisslicer.com/download.html
Slic3r - http://slic3r.org/ 
  http://dl.slic3r.org/win/ (WINDOWS)
  http://dl.slic3r.org/mac/ (MAC OS X)

Host

 ReplicatorG- http://replicat.org/ (untested to my knowledge)
Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox