Extruder Head Wobble Fix

From SoliWiki
Jump to: navigation, search

this moves the bottom Teflon retainer block on the x-axis carriage to a spring loaded arm. Using it, the head no longer wobbles when I'm printing near the back of the print bed, which occurred previously due to force from the cable assembly. The image is kind of deceiving. The spring is made of very fine wire about 0.7 oz of force. This isn't the same as the z-axis wobble, which is a separate issue.

Extruder head wobble fix.stl

CIMG0974.jpg

Personal tools
Namespaces

Variants
Actions
Navigation
Toolbox