File list

Jump to: navigation, search

This special page shows all uploaded files. When filtered by user, only files where that user uploaded the most recent version of the file are shown.

File list
Items per page:
Search for media name:
Username:

descDate Name Thumbnail Size User Description Versions
12:22, 24 September 2013E3D printershape.png (file)10 KBHunterGreen 1
20:03, 22 September 2013E3D step14.png (file)109 KBHunterGreen 1
20:01, 22 September 2013E3D step15.png (file)170 KBHunterGreen 1
20:01, 22 September 2013E3D step11.png (file)105 KBHunterGreen 1
20:01, 22 September 2013E3D step12.png (file)58 KBHunterGreen 1
19:58, 22 September 2013E3D step10.png (file)75 KBHunterGreen 1
19:54, 22 September 2013E3D step9.png (file)98 KBHunterGreen 1
19:44, 22 September 2013E3D step8.png (file)99 KBHunterGreen 1
19:38, 22 September 2013E3D step7.png (file)95 KBHunterGreen 1
19:38, 22 September 2013E3D step6.png (file)57 KBHunterGreen 1
19:36, 22 September 2013E3D step5.png (file)86 KBHunterGreen 1
19:33, 22 September 2013E3D step4.png (file)42 KBHunterGreen 1
19:27, 22 September 2013E3D step3.png (file)48 KBHunterGreen 1
19:24, 22 September 2013E3D step2.png (file)42 KBHunterGreen 1
19:20, 22 September 2013E3D step1.png (file)55 KBHunterGreen 1
16:14, 22 September 2013E3D heating block.png (file)142 KBHunterGreen (Shows on which side of the heating block the spacer is inserted.)1
16:13, 22 September 2013E3D final.png (file)549 KBHunterGreen (The final installation of the E3D.)1
16:13, 22 September 2013E3D test fit.png (file)144 KBHunterGreen (Shows a test fit install.)1
16:13, 22 September 2013E3D fan.png (file)148 KBHunterGreen (Shows the fan installed.)1
16:12, 22 September 2013E3D thermistor.png (file)288 KBHunterGreen (The thermistor installed in the E3D.)1
09:34, 19 September 2013Heated bed sd2 iso.png (file)54 KBDteck (Updated to include bottom rail holes)2
09:33, 19 September 2013Heated bed sd2 iso2.png (file)124 KBDteck (Updated to include bottom rail holes)2
09:33, 19 September 2013Heated bed sd2 bottom.png (file)86 KBDteck (Updated to include bottom rail holes)2
09:26, 19 September 2013Heated bed sd2 exploded.png (file)46 KBDteck (Updated to include bottom rail holes)2
09:25, 17 September 2013Hot end web.png (file)32 KBDteck (A standard MakerGear Groovemount PEEK. With a 36mm brass barrel /w both ends turned down, a solidoodle heater core, and a MakerGear nozzle. )1
09:24, 17 September 2013Hot end heat flow web.png (file)117 KBDteck (A heat and flow diagram of a standard MakerGear Groovemount PEEK. with a 36mm brass barrel /w both ends turned down, a solidoodle heater core, and a MakerGear nozzle. Showing the smooth flow and heat transfer in a properly tightened Hot end.)1
09:23, 17 September 2013Hot end heat flow tighten web.png (file)123 KBDteck (A heat and flow diagram of a standard MakerGear Groovemount PEEK. with a 36mm brass barrel /w both ends turned down, a solidoodle heater core, and a MakerGear nozzle. Showing the turbulence created by not properly tightening the brass barrel into the P...)1
09:20, 17 September 2013Hot end exploded web.png (file)25 KBDteck (Exploded view of a standard MakerGear Groovemount PEEK. With a 36mm brass barrel /w both ends turned down, a solidoodle heater core, and a MakerGear nozzle. )1
09:19, 17 September 2013Hot end cross section web.png (file)79 KBDteck (Cross section of a standard MakerGear Groovemount PEEK. with a 36mm brass barrel /w both ends turned down, a solidoodle heater core, and a MakerGear nozzle. )1
05:42, 23 April 2013Single-wall-print-5.jpg (file)26 KBPcpoirier 1
05:35, 23 April 2013Actual 0 5mm thin wall 20 mm box preview medium.jpg (file)6 KBPcpoirier 1
05:16, 23 April 2013CIMG0974.jpg (file)1,008 KBPcpoirier (Extruder head wobble fix)1
11:53, 22 April 2013Peek HeliCoil.jpg (file)162 KBPcpoirier (Reverted to version as of 15:16, 22 April 2013)8
02:48, 20 April 2013Printer shape.JPG (file)54 KBPcpoirier (Reverted to version as of 15:05, 19 April 2013)3
12:35, 14 March 2013Solidoodle-delivery.png (file)17 KBKrist10an (March update)8
12:43, 23 February 2013Eeprom.png (file)66 KBNickythegreek (Repetier-Host EEPROM screen)1
05:57, 23 February 2013Laser rocker.jpg (file)1.14 MBRincewind (Laser rocker for Z wobble measurement (copyright by TealVince))1
04:08, 23 February 2013Wobble.jpg (file)3.58 MBRincewind (Examples of noncompensated/compensated Z wobbling)1
03:49, 23 February 2013Banding good.jpg (file)3.82 MBRincewind (Example of an object with no banding)1
03:45, 23 February 2013Banding bad.jpg (file)4.25 MBRincewind (Example of bad banding in an object)1
10:12, 27 November 2012Arduino upload.png (file)14 KBRincewind (Upload button on the Arduino interface)1
17:03, 3 November 201229 side mount example.jpg (file)244 KBLawsy 1
17:01, 3 November 201229 side mount assembled.jpg (file)227 KBLawsy 1
16:49, 3 November 201229 side mount attached.jpg (file)361 KBLawsy 1
16:47, 3 November 201228 custom knob mounting.jpg (file)298 KBLawsy 1
16:31, 3 November 201227 case mounting.jpg (file)401 KBLawsy 1
16:27, 3 November 201226 Firmware updated.jpg (file)249 KBLawsy 1
16:09, 3 November 201225 initial power up.jpg (file)288 KBLawsy 1
16:09, 3 November 201224 ribbon cable.jpg (file)234 KBLawsy 1
16:04, 3 November 201223 1284P inserted.jpg (file)348 KBLawsy 1

First page
First page
Previous page
Previous page
Last page
Last page
Personal tools
Namespaces

Variants
Views
Actions
Navigation
Toolbox